OFFLINE
no device · changes saved locally · connect to sync
  • AUDIOAudio▾
    Curves · 12 PTS● DRAG DOTS TO EDIT
    C+H +0.30C-ON +0.20S-ON −2.50012002400360048006000−100.0+10+20
    Can't find your sound? Find it by ear ↗
    Live tone source
    +0.0M/S
    −5−3−10+1+3+5+10 M/S
    SNAP
    Now
    SILENT0.00 m/s

    Silent zone. Tone starts above +0.05 or below −2.50 m/s.

    Trend average (~0.4 s, fixed): 0.00 m/s · steady

    Last 20 seconds
    slider vario (averaging 0.10 s) trend average (~0.4 s) climb threshold now tone climb weakening
    Move the slider or start the demo

    How the early exit works: when the vario drops below its ~0.4 s average (dashed), the climb counts as weakening (strip at the bottom) and the climb threshold (orange line) lifts from +0.05 to +0.30 m/s — by +0.25. The tone stops before the vario reaches +0.05, making up for the smoothing lag. Once the vario rises again, the threshold drops back to +0.05.

    Zones
    Sink tone< −2.50 m/s

    Sinking faster than −2.50 m/s — the sink tone is always on, wherever you came from.

    Silent−2.50 … +0.05 m/s

    From −2.50 to +0.05 m/s the device is silent. Any tone stops here, wherever you came from.

    Early exit+0.05 … +0.30 m/s

    Climb between +0.05 and +0.30 m/s. While the climb grows or holds, the tone is on. As soon as it weakens (vario below its average), the tone stops here — before the vario reaches +0.05 m/s. This makes up for the smoothing lag: the climb stops, the device goes quiet right away. Starts again above +0.30 m/s or once the climb stops weakening.

    Climb tone> +0.30 m/s

    Climbing faster than +0.30 m/s — the climb tone is always on.

    Buzzer Volume
    When it sounds

    The values match no preset — this is your own setup. Pick a preset to set the thresholds, holds, early exit and averaging at once; the sound curves stay as they are.

    Audio
    Smooth frequency change
  • BEHAVIOURBehaviour›
  • FANETFANET›
  • TASTAS›
  • UARTUART›
  • POWERPower›